navigation
suche
Inhaltsverzeichnis
Factory settings
To load the BL-NET factory settings, the battery must first be removed and, when the CAN bus connection is plugged in, the START button on the Bootloader must be pressed and held pressed until only the green LED lights up.
The factory settings include the following parameters:
CAN bus:
| Node No.: 62 |
Ethernet
| MAC address | 02 50 C2 5C 60 xx (xx = BL-number) |
| IP address: | 192.168.0.1 |
| Subnet-Mask | 255.255.255.0 |
| Gateway | 192.168.0.1 |
| BLD - No.: | 0 |
| HTTP port: | 80 |
| TA port: | 40000 |
Passwords since ver. 2
| Expert | no password specified |
| Client | no password specified |
| View only | no password specified |
Passwords till ver. 1.43
| Expert | no password specified |
| Client A | no password specified |
| Client B | no password specified |
| Client C | no password specified |
| View only | no password specified |
Dimensions
(W x H x D) 125 x 75 x 27 mm
Doku Technische Alternative
Diese Dokumentation zur UVR1611 wurde
erstellt von Technische Alternative.