Electrical connection (type dependent)

The electrical connection should only be made by a professional electrician in accordance with the relevant local guidelines.

Warning: Only work on the inside of the device when it is not connected to power. If you assemble the device with the power connected, it may be damaged. Connect all bus cables to the PCB according to the labelling.

The first CAN-bus interface is designed for a bus rate of 50 kBaud. Consequently communication with the UVR1611, CAN-Monitor, I/O-module and BL-NET devices is possible. The second CAN-bus interface has a sliding switch for switching between the following bus rates and the maximum permitted bus length according to the specification: